H-Polymer MS Transparent - Hybrid Polymer Packaging: 290 ml

Packaging and storage:

Store in the original closed packaging at a temperature between 5 and 35 °C. With proper storage, the shelf life is 12 months from the date of production. Keep the glue out of the reach of children and protect it from frost. 

Application:

The surface on which H-polymer is applied must be free of dust, pollen, grease, rust, and other substances that reduce adhesion. The glue does not require penetration, but on specific bases, the use of penetrating varnishes may be necessary.
Before starting the gluing, secure the edges with adhesive tape. Apply the glue using a manual or pneumatic caulking gun. The applied glue can be spread with a silicone spatula soaked in water and soap.
Use tools made of plastic or stainless steel. The glue hardens by reaction with moisture from the air; therefore, glue in rooms with air access. Clean the tools with a paper towel and wash with a solvent.
For more information, consult the technical and safety data sheets.

Usage:

• Gluing and sealing of building materials: natural stone, wood, concrete, metal, bricks, glass, ceramic, plaster, polyurethane, plastic, chipboard, etc.,
• elastic joints in vibrating structures,
• junction elements in galvanized steel sheets, brass, and other metals.

Features:

Universal glue based on hybrid polymers (modified silane). It is characterized by a high initial adhesive strength. It adheres perfectly to all building materials, even on damp surfaces. 
H-polymer is a transparent polymer silicone free of odors, does not contain solvents, isocyanates, and silicones. It is not sensitive to chemical substances: weak acids, alkalis, and oils. 
The perfect initial adhesive strength allows gluing without having to support the glued elements. After hardening, the joint can be painted even with watercolors. The joint is permanent, completely resistant to changing weather conditions and UV rays.

Treatment time	about 6	min
Full curing time	2–3	mm/24 h
Application temperature	+5 - +35	°C
Heat resistance (of the cured product)	-40 - +90	°C
Breaking strength according to ISO 8339	2.3	Mpa
Initial bond on a horizontal surface	500	kg/m2
Initial bond on a vertical surface	125	kg/m2
Shore A Hardness:	approximately 90
Density	1.43	g/cm3
Elongation at break according to ISO 8339	30	%
Yield rate	From a 290 ml cartridge, approximately 23 meters of 4 mm diameter white joints are obtained

This category of products offers a wide range of adhesives, polymers, and silicones for various applications and materials. Precisely because of their wide range of applications, we are constantly introducing new products.